Cord heat-insulating IZOPACK-50S
The IZOPACK-50S thermal insulation cord consists of high-temperature silicone and E-type glass fiber roving in the middle
Temperature (long-term): +700 оС
Detail
Thermal insulation cord IZOPACK–K50
Lightweight, elastic glass cord, round section. Sufficiently soft, fills and seals well any difficult gaps and joints. Resistant to mechanical stress, restores shape after compression, chemically inert.
Packaging options: reels from 100 to 500 meters, blister from 1 to 5 meters.
Detail
Thermal insulation cord IZOPACK–K50 G
Soft cord glass cord with graphite impregnation, round section. The cord recovers its shape after compression, fills and seals gaps and joints well, does not stick. Use temperature up to 700 оC.
Packaging options: reels from 100 to 500 meters, blister from 1 to 5 meters.
Detail
Thermal insulation cord IZOPACK-K70
Soft knitted cord of round section from a basalt thread. The cord recovers its shape after compression, well fills and seals cracks and joints, does not stick together. Application temperature 700 °C.
Packaging options: reels from 100 to 500 meters, blister from 1 to 5 meters.
Detail
Thermal insulation cord IZOPACK–50
IZOPACK-50 is cost-effective cord produced by braiding the yarns of “E”-glass. It is good and cheap substitute of asbestos, suitable for many applications. It offers excellent mechanical property and chemical resistance
Detail
Thermal insulation cord IZOPACK–52
IZOPACK-52 is made by braiding of fiberglass yarn. Ceramic wool with low thermal conductivity used for the core of this sealant cord. This sealant rope recommended as a cheap replacement of asbestos packing.
Detail
Thermal insulation cord IZOPACK–57
Heat-insulating cord of average density. Application temperature up to 550 °C continuously and 1000 °C for a short time. Section shape: square, circle, rectangle.
Detail
Thermal insulation cord IZOPACK–70
Heat-insulating cord through weaving. The cord is made of basalt fibre. Sectional shapes: round, square, rectangular.
Detail
Thermal insulation cord IZOPACK-70G
Dense heat-insulating cord through weaving with graphite-filled PTFE impregnation. Use temperature +700 °C permanently and +900 °C short-term. Intersection shapes: round, square, rectangular.
Detail
Thermal insulation cord IZOPACK–72
The IZOPACK-72 thermal insulation cord consists of mullite-silica fiber, which is dense with basalt roving.
Characteristics:
Use temperature: +700 °C (up to +1000 °C for a short time)
Thermal conductivity at +600 °C: 0.17 W/mK
Weight loss on hardening: 2%
Section dimensions: from 14 to 120 mm.
Section shapes: round, square, rectangular
Place an order, ask technical questions, get advice: +38(067)2475599, sd@izola.com.ua
Detail
Thermal insulation cord IZOPACK–90
IZOPACK-90 consists of ceramic filaments reinforced with fiberglass roving. It can be used at continuous temperatures up to +880 оC. It has very good chemical resistance and dielectric properties. Section shapes: circle, square, rectangle.
Detail
Thermal insulation cord IZOPACK–90Т
Dense heat-insulating ceramic cord with application temperatures up to +850 oC permanently and +1000 oC short-term. Cross-section round. Weave type: twisted.
Detail
Heat-insulating cord IZOPACK–92
Soft ceramic cord with application temperature of 850°C permanently and 1000°C short term. Sections: square, round, rectangular.
Detail
Thermal insulation cord IZOPACK-97
Heat-insulating cord brand IZOPACK-97 with an application temperature of +850 °C permanently, up to +1000 °C for a short time. Section shapes: round, square, rectangular.
Detail
Thermal insulation cord IZOPACK-979
Heat-insulating cord IZOPACK-979 with application temperature of +900 °С permanently and 1000 °С short-term. Section shapes: round, square, rectangular.
Detail
Thermal insulation cord IZOPACK–120
IZOPACK-120 is an extreme high temperature rope with heat and flame resistant, used in almost all industries for the highest heat protection available. It braided of alumina-silicate yarn reinforced by metal wire. It can be used at +1250 оC continuously.
Detail
The IZOPACK–120 cord consists of a filament of mullito-silica fiber reinforced with a metal heat-resistant filament.
Characteristics:
Application temperature: up to +1250 oС
Thermal conductivity at +600 oС: 0.26 W/mK
Mass loss during roasting: 17%
Cross-section sizes: from 6 to 120 mm
Sectional shapes: round
Weaving type: twisted
Regulatory document: TU U 26.8-25301932-003:2005 "Heat-insulating cords of the IZOPACK brand"
Place an order, ask technical questions, get advice: +38(067)2475599, sd@izola.com.ua
Detail
Ceramic cord with graphite coating, dense weave. The application temperature is 1100 °C continuously and 1250 °C short-term. Sections: square, round, rectangular.
Detail
Thermal insulation cord IZOPACK–122
IZOPACK-122 is an extreme high temperature rope, heat and flame resistant, made of ceramic yarn reinforced with metal wire and ceramic wool in core. It can be used at +1250 оC continuously. Applications for this product include as seals and gaskets on oven, furnace and kiln doors, fireplace doors, industrial and laboratory ovens.
Detail
Thermal insulation cord IZOPACK–130
IZOPACK-130 is made from high silica yarn. High silica fiber does not vitrify and this rope recommended as a replacement of ceramic packing. High heat insulating property makes this type of seal particularly suitable for static sealing applications at the maximum temperature of +1350 oC.
Detail
Thermal insulation cord IZOPACK–132
IZOPACK-132 is cord made by braiding high silica yarn with a core of ceramic wool. This sealant cord used in extreme high temperature medium and has heat and flame resistant. Good mechanical properties and chemical resistance makes this type of seal particularly suitable where high temperature seals are required.
Detail
Thermal insulation cord IZOPACK–139
Heat-insulating cord IZOPACK-139 of dense weaving with application temperature up to 1200 оC. Withstands exposure to water, superheated steam, metal splashes, open flames. Section shapes: round, square, rectangular.
Detail
